August 27, 2013

Leader Grips---No More Zippers!

I liked my zippered leaders for a long time---don't get me wrong. They work well, and I think if you do a lot of quilts where you take one quilt off to "zip" on another quilt to do custom quilting so that you can do edge to edge quilting on another quilt project, and you have multiple quilting projects going on-- zipper leaders work really well.

What was getting to me was having to take the quilt backing to my sewing machine, find a place to lay out the backing fabric close to the machine, move projects I was working on out of the way to sew on the quilt backing to the zipper leaders, find the centers of the leaders, match the centers of the quilt backing, insert some straight pins to hold the backing to the leader, get the leader fabric and quilt backing fabric under the sewing machine foot, make sure I had some cheap basting thread loaded into the sewing machine (I never used my "good" thread for machine basting)---sew baste the leaders to the fabric. Take the quilt backing attached to the leaders back to the long arm. Zipping was fast. No problem there. Once the quilt was finished, unzip, and clip a few basting threads, pull the bobbin thread, and everything was a go.

I just got tired of this routine.  I had at one time tried the Renae Haddins' Red Snapper system, but for the life of me, I could not (and neither could my strong armed husband) ---get those Red Snapper grippers to clamp over the Red Snapper rods inside the leader fabric casings.  We tried for weeks in hopes they would loosen up a bit. But, it never happened. Renae was very good about a refund. Maybe the problem we experieced was our fault or the product has changed. I hear good things about this gripper system as well.

Now, years later all zippered out--- I was looking for some type of gripper system that could possibly work for me.

I heard about "Leader Grips", watched some You Tube videos on the product and thought about it for a few weeks.  I actually found myself avoiding machine quilting because it meant I had to sew on the zippered leaders. I know that sound lazy, but that's how I felt----

I decided to order the Leader Grips. If all else failed, I would return them. They arrived in less than a week. All was not well the first two times I attempted to clamp them onto the leaders. I thought, oh-no, here we go again.

I started to analyze why the quilters, like Matt Sparrow aka: ManQuilter using the Leader Grips  in the video was not having the problems I was experiencing. I concluded it had to do with the channel or hem in my leaders plus the long measuring tapes I had also sewn onto the leaders that was in very close proximity to the hem or channel. The leader grips were bumping into it.

So, I removed the measuring tapes. I never used them anyway. I used the center marks I had Sharpie penned into the fabric instead.

I inserted the Leader Grip rods which by the way are just slightly smaller than the Red Snapper rods---and I noticed the channel even though it was the 3/4 inch hem the Leader Grip documentation suggested was still too much excess fabric. The rods were not tight in the hem so the grippers would slip around over the excess fabric. I made a new stitching line or hem line in the leaders with my long arm. Now the Leader Grip rods are tight inside the leader fabric and no more slipping.

Following the Leader Grip video instructions once more---Success! The Leader Grips went on smoothly! I press them on with the heel of my hand. I am very pleased with the Leader Grips and have completed 3 quilt tops in 3 days! No more procrastination or contemplating or mental block about loading a quilt backing onto the long arm.

Yay! I can load my quilt backing in about 15 mins. now. I'm sure I'll get even speedier with time.

Here are some photos of the Leader Grips on the quilt backing I loaded today. Number Four quilt!



Leader Grips on the front leader. One small gripper holds the center of the quilt in place while I put the the two longer grippers in place over the fabric.

The extra length of Leader Gripper plastic sleeve extending beyond the quilt backing that is loaded and rolled onto the long arm roller.

The Leader Grips holding the fabric in place on the take up roller.

The small Leader Grip indicates the center of quilt backing and holds the fabric in place on the leader  while I insert the longer Leader Grip clamps in place. I leave the smaller gripper in place.

Leader Grips holding the quilt backing. Partially rolled. Ready to load the batting and quilt top.

I purchased the 8 ft. two leader system because I float my quilt tops and don't use the 3rd leader

Three Martha Quilts~ quilted in Three Days!

 Donation quilt #1

 Donation quilt #2


Donation quilt #3

Leader Grips to the rescue!

August 20, 2013

Fun Pillowcases

Yesterday I made pillowcases for my sister in laws little grandchildren.
I had so much fun stitching these up.


Corvettes, Rockets and Ladybugs!


August 19, 2013

Tip: Pencil Grips

Tip: For all my machine embroidery friends. Buy some pencil grips and make your hoops more comfortable to grip and tighten.


Latex free silicone type pencil grips. Cut in half then slip them on.

Want to keep your hoops clean from sticky residue. Another Tip: "Williams Electric Shave" on a Viva paper towel or cotton ball works like Magic! ---added bonus; it has a nice fragrance and won't harm your hoops! Rinse and dry after cleaning.

August 10, 2013

Pineapple Angel Food Cake

I found this recipe on another bloggers posting. I thought I would give that blogger credit, but when I goggled "Pineapple Angel Food Cake"---the search came up with dozens of sources for this quick easy cake recipe.

Want a quick desert! You just need a few basic ingredients.

Pineapple Angel Food Cake

1  package of Angel Food Cake (any brand)

1   20 oz. (tall large can) of Crushed Pineapple (don't drain this)

One of your large mixing bowl because this mixture bubbles and foams up. Stir by hand, no mixer required.

Put the cake mix in bowl, open the can of crushed pineapple. Don't drain it! Mix it thoroughly into the Angel Food cake mix. Pour into a 13 x 9 pan.

Toppings:  You don't need "toppings", but it certainly adds to the enjoyment of serving, and I think it the cake would taste a bit dry without a "topping".

Suggestions: Cool-Whip, Whipped Cream, Ice Cream, some pineapple--a cherry on top!

Bake at 350 degrees for approx. 35 to 40 mins. Don't open the oven door when checking cooking, it makes the cake deflate some. Let cool before serving.

Here are some pictures.


Mixing it up! I'm right at the brim of my bowl!


In the pan!




On the plate! Enjoy!